The Top Five Pros and Cons of Torque Wrench

 Torque wrenches are tools for tightening nuts and bolts to a specific torque value. This tool allows fasteners to be tightened to the proper tension, avoiding over-tightening or joint damage caused by reduction. This means that accurate torque measurement is critical to the equipment's safety, assembly, and performance.

Pros of Torque Wrench

Perfect for heavy-duty applications

You still have to apply pressure to tighten or loosen a bolt/nut using a regular wrench. This means you won't reach the recommended torque if you don't have the energy. The hydraulic wrench is a hydraulically powered tool that generates torque. You will have to put up minimal effort. These tools are ideal for flange bolting and other heavy-duty projects.

Self-ratcheting

The primary purpose of utilizing calibrated wrenches is to ensure accuracy. In hydraulic torque wrenches, this is a characteristic that has not been overlooked. They're self-reinforcing. The tool will stop applying torque after the desired torque has been reached. This is one of the characteristics that helps with accuracy and consistency when working with bolts and nuts.

Huge selection

These bolting tools are for industrial use, but they can also be used for different applications. They've been modified over time, and you'll be able to discover one that's lightweight and has a smaller nose radius to suit your needs. Furthermore, you do not need to purchase the wrench.  torque tools can be rented from a variety of companies (momentsleutel).

There are numerous more advantages to using hydraulic torque tools . The key benefits are reduced bolting time, greater joint integrity, and minimal chance of under or over-tightened bolts/nuts.

Accuracy 

This stall-type tool with regulated torque can achieve +/- 5% accuracy and +/- 2% repeatability which is very important for controlled bolting.

Power and Safety 

Any pneumatic torque wrench system with the highest power-to-weight ratios. This wrench has a cost-effective pistol grip that lowers operator strain and helps to prevent injury.

Cons of Torque Wrench 

• The battery has a cycle life and may need to be replaced or recharged regularly.

• Simply said, a hydraulic, pneumatic or electric torque wrench is more durable.

• Low Grade Tools have reduced accuracy and torque reproducibility.

• Low Quality materials used in duplicated torque wrench makes it less durable than original pneumatic or electric torque wrench motors, resulting in a shorter tool life duration.

• Improper storage will eventually cause accuracy to deteriorate.

The top 8 things to consider while using torque wrench:

Storing your torque wrench

When a torque wrench is used frequently, it is not necessary to rewind it. However, when keeping a torque wrench for a long time, users should always wind it down to the smallest scale setting and never to zero.

A fully loaded torque wrench that has been stored for a long time can cause the spring to set, weakening it over time. By completely off-loading the spring, on the other hand, other components within the wrench may move fractionally relative to each other. The orientation of these components can vary when you reapply spring compression, reducing accuracy. Overall, it is preferable to leave a slight compression in the spring while storing it.

For accurate results, one click is enough.

Torque wrenches are frequently allowed to click numerous times without the user knowing the increased torque applied to the bolts. Remember to use your torque wrench smoothly and steadily, and that one click is sufficient.

Using your wrench on an anti-clockwise thread

Many torques wrench only show torque in one direction: clockwise. As a result, users must always check the wrench's specification before using it on an anti-clockwise thread to ensure that the tool is acceptable and that torque control is not lost. The left-hand wheel nuts on some automobiles and the left pedal on bicycles are examples of left-hand threads.

Adjusting your torque wrench

Because equipment manufacturers will always offer the required torque for any piece of equipment, it is critical to ensure that these levels are met while adjusting your torque wrench. Constantly adjust the wrench up the scale to the appropriate torque figure to provide a precise torque setup.

Using marked loading points for accurate results

Many torque wrenches have a marked loading point on the length-dependent handle, although few people use it. Most torque wrenches must be operated with your hand centered on the marked load point for accurate results. When calibrating the torque wrench, it's also critical to keep this load point in mind.

Using torque wrenches for undoing

Most torque wrenches can be used to undo, as long as users take precautions and don't exceed maximum torque. If the bolt does not free up within the wrench's maximum torque, a different tool should be used instead. When you exceed the maximum torque limit when loosening the bolt, you risk affecting the wrench's accuracy, leading to future problems. If in doubt, loosen the bolt with a different tool.

Adding extensions to the torque wrench handle

Users should never attach a pipe or any other type of extension to the handle of a torque wrench. This can severely damage the tool and cause it to become inaccurate, not to mention the possible safety danger.

Locking it in

It's all too easy to tweak a wrench's settings while using it, so if your torque wrench has an adjustment lock, you should always utilize it before operating it to avoid any unwanted modifications.

Content Sources :- ABSGroup